top of page
Search

Pick Your Colourway: Twenty Ways to Dress a Skyward

42 minutes ago
3 min read

Here's a question I get asked a lot: "What colour should I print my Skyward?"

It's a fair question. A telescope takes a few kilos of filament, so you want to love the colours before you hit print. And since every Skyward is printed, it can be any colour you like. Our scopes have gone out in purple, in pink and mint, in blue and gold, and even in yellow with a rubber duck on the side.

So we made it a lot easier to choose. Our sister company, Tundra 3D, now has a Skyward Colourways page with twenty of our favourite colour combinations for the Skyward 150 Compact and the Skyward 200.



A 3D preview of a Skyward 200 telescope in sparkly black and deep blue, with blue-to-teal accents
Northern Lights on a Skyward 200: sparkly black with accents that roll from deep blue to teal.

Spin It, Then Build It

Pick your scope with the 150/200 switch, then tap a colourway. You get a 3D preview of the telescope in those colours, and you can drag it around to see it from every side. When you find the one you like, hit Build this one and it opens the kit with all the filaments already filled in. You don't have to work out how much of each colour you need.

Each colourway sets all five colours on the scope:

  • Primary: the main body

  • Accent 1 and accent 2: the parts that make it pop

  • Baffles and dew shield: PETG-CF, which keeps stray photons in check (and, well... looks super cool)

  • Extrusions: the aluminium rails. Clear ones come with the kit, and black, gold, red and blue anodized rails are an upgrade.

Glitter and Chameleons

Two kinds of filament make these colourways really fun.

Sparkling (Galaxy) filaments have glitter mixed right in. A Galaxy Black telescope looks like it's carrying its own little star field around.

Chameleon filaments change colour depending on the angle you look at them from. Nebula Purple shifts from magenta to violet, and Burnt Titanium rolls from dark blue to teal. As you walk around the telescope, it changes colour on you.

A 3D preview of a Skyward 200 telescope in sparkly black with magenta and violet accents
Nebula: Galaxy Black with Nebula Purple accents drifting from magenta to violet.

The 3D preview does its best to show the sparkle and the colour shift, but honestly, real spools catch the light even better. Colours on screen are approximate.

A Few of My Favourites

All twenty have names. Here are a few that I like.

A 3D preview of a Skyward 200 telescope in crisp white with black trim
Classic Observatory: crisp white with black trim, the timeless look of a proper observatory telescope.
A 3D preview of a Skyward 200 telescope in sparkly red with orange accents
Red Planet: Galaxy Red with orange accents.
A 3D preview of a Skyward 200 telescope in sparkly purple, white and gold
Royal Observatory: Galaxy Purple, bright white and gold.
A 3D preview of a Skyward 200 telescope in silver and white with grey sparkle
Moonlight: silver with Galaxy Grey sparkle and white trim. This is one of the quieter ones, and I like it a lot.
A 3D preview of a Skyward 150 Compact telescope in sparkly blue with silver trim
Starry Night on a Skyward 150 Compact: Galaxy Blue sparkle with silver trim.

There are lots more: Midnight, Rose Nebula, Redshift, Blueshift, Mission Control, Dark-Sky Forest, Solar Eclipse, Iris, Lunar Titanium, Twilight Rose, Solar Flare, Red Giant and Cotton Candy. Go have a look.

What They Look Like for Real

The 3D previews are handy, but real prints look better. Here are a couple of Skyward 150 Compacts that have come off our printers.

The tube of a blue Skyward 150 Compact standing upright on a cutting mat, with four gold rails holding the printed parts together
Blue with gold rails: the Skyward 150 Compact I built for the Evening of Elegance.
Terry looking over Candy Floss, a pink and mint Skyward 150 Compact with a mint star on its bearing, in a workshop
Candy Floss, our pink and mint Skyward 150 Compact, with Terry looking it over. This one is bright. If you want people to notice your telescope at a star party, it will do that.

Why ABS?

Every colourway uses Tundra 3D filament: ABS Pro, ABS Pro Sparkling and ABS Chameleon, plus PETG-CF for the baffles and dew shield. You can add it right on the kit page when you order your kit, so you don't have to work out the amounts yourself. That's what we recommend for the Skyward kits, because a telescope lives outside at night and probably spends some time in a hot car. ABS holds its shape. It does need an enclosed printer, though, and a filter or a well-ventilated room for the fumes. If you're printing at school, check with your teacher first.

If you're new to building a Skyward, our beginner's guide walks you through the whole thing.

Go pick yours on the Skyward Colourways page, and when it's built, show us on Discord. Clear skies!

 
 
 

Comments


bottom of page