top of page
Search

Your First Telescope Build: The Skyward 150 Compact

Nov 7
5 min read

Updated: 19 minutes ago

So you'd like to build your own telescope! Maybe you're in high school and looking for a project that's bigger than a science fair poster. Maybe you've loved the night sky for years and finally want a scope of your own. Either way, you don't need to be an engineer, and you don't need to know your way around a 3D printer yet. Plenty of first-time builders have put Skywards together at our Scope Building Saturdays.

The Skyward 150 Compact is a telescope you build yourself. Here's what that really involves, what to expect, and where to get help when you need it.

Already comfortable with a 3D printer and want the nuts and bolts? The maker's guide on Tundra 3D might be more your speed.

The tube of a blue Skyward 150 Compact standing upright on a cutting mat, with four gold rails holding the printed parts together
The Evening of Elegance Skyward 150 Compact, coming together on my bench.

What Kind of Telescope Is It?

The Skyward 150 is a reflector, the same basic design Isaac Newton came up with. Instead of lenses, it uses a curved mirror at the bottom of the tube to collect light. A small flat mirror near the top bounces that light out the side and into the eyepiece, where you look in.

Light from the things we want to see is incredibly faint, so a telescope is really a bucket for catching photons, the tiny building blocks of light. The bigger the bucket, the more you catch. The Skyward 150's mirror is 150 mm (about 6 inches) across, and it gathers about 450 times as many photons as your eye. That's enough for craters on the Moon, Saturn's rings, Jupiter's moons, sparkling star clusters and the brighter nebulae.

It sits on a raised base at a comfortable height, so you don't have to stretch up or kneel on the wet grass to look through it.

What You Get, and What You Make

The telescope is part kit, part 3D printing.

The kit comes from our sister company in Guelph, Tundra 3D. It has the parts that are hard to make: both mirrors, the focuser (the part that slides the eyepiece in and out), four aluminium rails for the frame, a red dot finder for aiming, a laser for lining up the mirrors, and all the screws and little bits.

You print everything else from our free files: the tube parts, the mirror holder, the base and more. The build video is free too.

You'll also need some plastic pipe from the hardware store for the tripod legs, and a few basic tools: Allen keys, a screwdriver, a small saw and a soldering iron.

Don't Have a 3D Printer?

No problem. Lots of people don't. You could:

  • Ask at school. Many tech departments and libraries have printers.

  • Try a makerspace or public library near you.

  • Use a print service that prints the files for you.

  • Team up with a friend who prints. Building a telescope is more fun with two anyway.

The printer needs a bed of at least 220 x 220 mm. Whoever does the printing should know that the best plastics for this telescope, ABS and ASA, give off fumes while they print. They need an enclosed printer with a filter, or a very well-ventilated room. If you're printing at school, check with your teacher first. On an open printer, PETG is the safer choice.

How Long Will It Take?

Longer than a weekend. That's part of the fun!

Printing takes the most time by far: many hours, spread over days or weeks depending on the printer. The trick is to keep the printer busy. Start the longest prints before bed.

Building takes an experienced builder at least 20 hours. If this is your first big build, plan on two or three times that, at least. You'll stop to check the video, ask questions and redo a step or two. Everyone does. When we built the Bent Nail Observatory, some of us had to redo things two or even three times, and it turned out great.

Planning and getting organized take time too, so don't rush. A telescope built carefully works a lot better than one built fast.

The blue tube of a Skyward 150 Compact lying on a cutting mat with its rings and gold rails fitted, and the star bearing rings beside it
Nearly there: the tube with its rings and rails on, waiting for its star cores.

A Few Things That Help

  • Watch the build video first. All of it, before you start. A step is much easier to follow when you've already seen where it's going.

  • Sort your parts. Put the screws in a tray by size before each section. Hunting for one tiny screw halfway through a step is no fun.

  • Practise the tricky bits. You'll use a soldering iron to melt small brass threads into the plastic. Try a few on a spare print first.

  • Never force it. If a part won't go, stop and figure out why. Pushing harder usually breaks something.

  • Be gentle with the mirror. Hold it by the edges, never touch the shiny side, and take your time when it goes in.

Here's what a few of the steps look like, from my build of the Evening of Elegance scope.

Gold aluminium rails fitted into a blue printed mirror cell, with the mirror inside, on a cutting mat
The aluminium rails go into the mirror cell. The mirror is already in there.
Hands fitting the focuser and red dot finder to the top end of a blue Skyward 150 Compact tube
The focuser and the red dot finder go on the top end.
A hand fitting a round blue bearing ring with a grey star in the middle onto the side of the telescope tube
And the fun part: the bearing ring with its star core.

The Most Important Rule

Never point your telescope at the Sun unless it has a proper solar filter on the front, checked for holes before every use. A telescope gathers a huge amount of light, and pointed at the Sun it can damage your eyes in an instant. In daylight, keep it pointed well away from the Sun, and cover the red dot finder too.

Your First Night Out

The telescope is built, the sky is clear, and... where do you point it? Finding things is the part that trips up most new astronomers, so I made an app to help.

Skyward Push-To is free and runs in your phone's web browser. Your phone sits in a dock on the telescope. Pick something to look at, and the app shows arrows for which way to push. When the arrows turn into check marks, have a look in the eyepiece!

The Skyward Push-To app showing turn and tilt arrows that change to check marks when the target is reached
Follow the arrows. When they turn into check marks, have a look.

It also helps you plan. Tell it how much time you have, and it picks good targets for tonight in a sensible order. Each one gets a simple rating for how easy it is to see, plus a picture of roughly what it will look like in your eyepiece, so you know what you're looking for.

The app's preview of the Hercules Cluster, a round ball of stars, as seen through a 23 mm eyepiece
What the Hercules Cluster should look like at low power.

A few tips for night one:

  • Set up outside about 30 minutes early, so the mirror can cool down to the night air.

  • Line up the red dot finder in daylight on a faraway tree or building. Never anywhere near the Sun.

  • Start with something bright and easy, like the Moon or the Pleiades.

  • Dress warmer than you think you need to. You'll be standing still for a while.

The app is brand new and I'm still testing it, so parts of it may be a bit rough. If you're new to the sky, you're exactly who I made it for, and your feedback is the most useful of all.

You Won't Be Building Alone

Lots of people have built Skywards, and plenty of them started right where you are now. Frey printed and built his first one in six days, and wrote about it here. If you get stuck, the Ten Telescopes Discord is full of builders who are happy to help. Bring a photo and tell us what you tried. Someone has almost certainly hit the same snag.

Is It Worth It?

Yes! A telescope you build yourself is one you understand inside and out. When something needs adjusting, you'll know how. And the first time you find Saturn on your own, through a telescope you made, is a night you won't forget.

Ready? Get the Skyward 150 Compact kit from Tundra 3D, watch the build video, and come say hi on Discord. Clear skies!

 
 
 

Comments


bottom of page